Scotsman FME1204 Spécifications télécharger pdf (Page 30)

NME954 & FME1204

May 2001

Page 30

To Remove the Condenser Fan Motor

Assembly

1. Remove top panel and the two service panels.

2. Unplug the two fan motor wire leads from the fan

motors.

3. Remove the two hex head bolts from the top end

of the fan motor assembly.

REMOVAL AND REPLACEMENT: Fan Blade and Motor

Electrical shock hazard.

Electrical shock can cause

personal injury.

Disconnect power before

beginning to service

components.

4. Lift up the fan motors and bracket assembly about

½" and pull out the fan motor assembly out the right

service access hole.

5. Repair as needed.

6. To reassemble: Place the fan motor assembly

lower flange holes over the two allen head cap

screws in the base, and reinstall the hex head bolts

at the top of the assembly. Plug the fan motors back

in, and replace the top panel.

1 2 ... 25 26 27 28 29 30 31 32

Pas de commentaire

Scotsman FME1204 Spécifications Page 30