Scotsman FME1504 Manuel de service télécharger pdf (Page 16)

1. The bin control is a device that senses light,

and must be kept clean enough so that they can

“see”. At least twice a year, remove the bin control

sensors from the base of the ice chute, and wipe

the inside clean, as illustrated.

2. The ice machine senses water level by a probe

located in the water reservoir. At least twice a year,

the probe should be removed from the reservoir,

and the tip wiped clean of mineral build-up.

3. Clean or replace the air cooled condenser

filter.Clean the air cooled condenser. Use a

vacuum cleaner or coil cleaner if needed.

Do NOT use a wire brush.

NME1254 & FME1504

June 2002

Page 16

ICE LEVEL

SENSORS

SLIDE IN

AND OUT

ICE CHUTE

SENSOR and CONDENSER MAINTENANCE

Clean the Probe's Tip with ice

machine cleaner and a clean,

soft cloth.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 28 29

Pas de commentaire

Scotsman FME1504 Manuel de service Page 16