Scotsman SCCP30 Manuel de service télécharger pdf (Page 29)

15. Lift evaporator platen up and tilt back enough

for bin assembly to clear the base.

16. Remove air baffle.

17. Unplug wire harness connector (at back of bin).

18. Remove 1 screw at each corner of the base.

19. Lift bin assembly off the base.

Note: Prop evaporator assembly up. A 3' length of

3/4" PVC tubing with one end inserted into the cup

mold and the other against the base will hold it up.

The hot gas valve, fan motor, condenser and

compressor are now exposed for service.

September 2009

Page 28

SCCG30 & SCCP30

Service Manual

Air Baffle

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Pas de commentaire

Scotsman SCCP30 Manuel de service Page 29