Scotsman TDE470 Manuel d'utilisateur télécharger pdf (Page 12)

Water System Operation:

The water system consists of a float valve,

reservoir and water dispense solenoid valve. The

water level in the reservoir tank is the same level

as that inside the evaporator. Building water supply

flows to both the float valve and the solenoid. The

float valve will open to add water to the reservoir

as water flows out to the evaporator. The solenoid

will only open if the water switch is closed and the

touch free sensor initiates an ice dispense.

Inside the evaporator there is a water seal. This

seal is the type that has a rotating half and a

stationary half. The area where the two seals

touch are smooth flat surfaces. When the auger is

installed in the evaporator, it forces the rotating

half of the seal against the stationary half. The

stationary half is spring-loaded and provides a firm

pressure against the auger portion of the seal.

Evaporator

Float Valve

Bin and

Reservoir

Overflow

Drain

Sink Drain

Water Inlet

Connection

Sink

Water Dispensing

Solenoid Valve

Water and Ice

Dispensing Spout

Water Seal

Water System Schematic

Electric Eyes

Ice

Dispensing

Vane

Inner Bin

Bottom

Water Level

Sensor

TDE470

February 1995

Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Scotsman TDE470 Manuel d'utilisateur Page 12

Commentaires sur ces manuels