Scotsman TDE470 Manuel d'utilisateur télécharger pdf (Page 5)

For The Plumber

Drains:

The dispenser requires a gravity drain. The pitch

on the drain tubes must be at least 1/4 inch fall per

foot of horizontal run. On long horizontal runs, a

vent at the back of the cabinet will improve

draining, and is recommended.

There are two drains to connect: A sink drain, a

⁄

plastic tube; and the bin drain, a

⁄

" plastic tube.

Install rigid tubing between the machine and the

building drain. Route the drains separately to the

building drain.

Water supply:

Connect cold, potable water to the machine. A

hand valve near the location is recommended. A

water filter is also a good idea.

Follow all local codes.

FOLLOW ALL APPLICABLE LOCAL,

STATE AND NATIONAL CODES

Strainer or

Filter

Water Inlet Fitting

(Inside Cabinet)

Sink Drain

Bin and

Reservoir

Overflow Drains

Water Supply

Building Drain

(Typical)

TDE470

February 1995

Page 5

1 2 3 4 5 6 7 8 9 10 ... 29 30

Pas de commentaire

Scotsman TDE470 Manuel d'utilisateur Page 5