Scotsman F0522 Manuel de service Page 43

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 51
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 42
Options
Vari-Smart
Optional adjustable ice level control (KVS)
When this option is present there is an adjustment
post and an additional indicator light to the right of
the four indicator lights mentioned earlier.
The ultrasonic ice level control allows the user to
control the point that the ice machine will stop
making ice before the bin or dispenser is full.
Reasons for this include:
Seasonal changes in ice used
Planning to sanitize the bin
Faster turnover for fresher ice
Certain dispenser applications where
maximum ice level is not desired
Use of adjustable ice level control
There are several positions the ice level can be set
to, including Off (knob and label indicators lined
up), where it fills the bin until the standard bin
control shuts the machine off. See the kit’s
instructions for complete details.
Note: There are two holes in the base for the
sensor: one for bins (nearest the back) and one for
dispenser applications.
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it
shuts off the indicator light next to the adjustment
post will be On.
Note: The maximum fill position
is when the arrow on the knob
points to the arrow on the label.
Dispenser applications:
Set the adjustment knob to
either the first or second
position CW after the
maximum fill position.
Smart-Board
Optional Advanced Feature Board (KSBU)
When this option is present there is an additional
display panel in the area below the main control
board. It is not visible when the front panel is on.
The Advanced Feature Board’s features include:
Seven day programmable ice level setting
when used with the optional Ultrasonic ice
level control
Recording of machine operation
Recall of malfunctions with the time they
occurred.
Optional Remote Lock Out (KSL)
This add on allows remote on-off control of the
machine, and is generally installed by leasing
companies. When the board has been remotely
locked out and shut off it must be reset by the
person or company that locked it out. It cannot be
reset on site.
September 2009
Page 43
N0422, F0522, N0622, F0822, N0922, F1222, N1322, F1522
Air, Water or Remote Service Manual
02-4294-01 Rev. A.
Adjust Ice Level
L
o
w
e
r
Bin
Full
Smart-Board Advanced Feature Control
See Instructions for Available Features
34
SEL
02-4293-01
ENTER
ESC
01/07
02-4294-01 Rev. A.
Adjust Ice Level
L
o
w
e
r
Bin
Full
KVS
02-4294-01 Rev. A.
Adjust Ice Level
L
o
w
e
r
Bin
Full
Vue de la page 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Commentaires sur ces manuels

Pas de commentaire