Scotsman F0522 Manuel de service télécharger pdf (Page 7)

Water

The water supply for ice making must be cold,

potable water. There is a single 3/8” male flare

potable water connection on the back panel. Water

cooled models also have a 3/8” FPT inlet

connection for the water cooled condenser. Chilled

water can also be used for this connection.

Drain

There is one ¾” FPT condensate drain fitting at the

back of the cabinet. Water cooled models also

have a ½” FPT discharge drain connection on the

back panel.

Tubing

Connect the potable water supply to the potable

water fitting, 3/8” OD copper tubing or the

equivalent is recommended.

Water filtration is recommended. If there is an

existing filter, change the cartridge.

Connect the water cooled water supply to the

condenser inlet.

Note: Do NOT filter water to the water cooled

condenser circuit.

Connect the drain tube to the condensate drain

fitting.

Connect the water cooled condenser drain tube to

the condenser outlet.

Do not Tee ice machine drains into the drain tube

from the ice storage bin or dispenser. Back ups

could contaminate and / or melt the ice in the bin or

dispenser.

Follow all local and national codes for tubing, traps

and air gaps.

September 2009

Page 7

N0422, F0522, N0622, F0822, N0922, F1222, N1322, F1522

Air, Water or Remote Service Manual

Air Cooled Plumbing

Water Cooled Plumbing

Potable

Water

Condensate

Drain

Potable

Water

Condensate

Drain

Condenser

Water

Condenser

Drain

1 2 3 4 5 6 7 8 9 10 11 12 ... 50 51

Commentaires sur ces manuels

Pas de commentaire

Scotsman F0522 Manuel de service Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Les fabricants de glaçons Scotsman F0522