Scotsman FME800R Manuel de service télécharger pdf (Page 29)

REMOVAL AND REPLACEMENT: Bearing And Breaker

Note: Removal of the auger, water seal,

evaporator and gearmotor must begin at the top of

the assembly.

To Remove the Breaker Bearing Assembly:

1. Remove panels and disconnect electrical power.

2. Push bail clamp back and remove ice chute

cover.

3. Unscrew and remove ice sweep.

4. Remove insulation halves from outside of ice

chute, lift up and remove ice chute.

5. The breaker may be removed from the auger

and evaporator without disturbing the auger.

a. Unscrew breaker cover from breaker (left hand

threads)

b. Unscrew auger stud from top of auger.

c. Unscrew 4 allen head cap screws holding

breaker to evaporator.

d. Lift up, and remove breaker/bearing assembly

from auger & evaporator.

6. Service the bearing. Check for rust, rough spots

and damage.

a. The bearing is pressed into the breaker, to

remove the bearing and replace it an arbor press

is needed.

b. Replace lower seals before installing new

bearing in breaker.

Note: seals must be pressed in with a tool pushing

against the outer edge only, they will not install by

hand.

Replace parts as required. Re-grease bearing with

Scotsman part no. A29123-001 bearing grease.

Replace top seal, and check the o-rings, replace if

cut or torn.

7. Reverse to reassemble: specific tools and

materials are required to install properly.

a. Add food grade grease such as Scotsman part

number 19-0569-01 to the seal area before

installing on the auger.

b. Check the seal to shaft areas for cuts, or rough

spots: none are permitted.

ICE

SWEEP

AUGER

STUD

ALLEN

SCREWS

BREAKER

Step 5-a Step 5-b

Step 5-c and Step 6

Electrical Shock

Hazard.

Electrical shock can

cause personal injury.

Disconnect electrical

power before beginning.

FME800R

August 1993

Page 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire

Scotsman FME800R Manuel de service Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Les fabricants de glaçons Scotsman FME800R