Check Gear Reducer Lubricant
Although there is no normal access to the gear
reducer lubricant, it can be checked without
removal and complete disassembly. The auger
drive motor must be removed and the lubricant
checked through the input shaft area.
Because of a shelf under the motor hole, only
about 3/16 of oil should be on the tip of the
screwdriver blade. Any more and there may be
water in the gear case, any less and it may be low.
The correct oil charge is 14 ounces.
September 2009
Page 35
N0422, F0522, N0622, F0822, N0922, F1222, N1322, F1522
Air, Water or Remote Service Manual
Normal Oil Level
Commentaires sur ces manuels