Scotsman F0522 Manuel de service Page 37

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 51
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 36
Service Diagnosis - Air Cooled
September 2009
Page 37
N0422, F0522, N0622, F0822, N0922, F1222, N1322, F1522
Air, Water or Remote Service Manual
Symptom Probable Cause Possible Correction
No ice
No power
Check that ice machine has power.
If power light is out, check
transformer.
Code 3: No water
Restore water, check filters, water
level and sensor
Status light is off Push and release ON switch
Code 1: No ice sensed
Check for ice flow down chute. if
very slow or no ice being made,
check for refrig. system failure
Check auger motor for power, if no
power, check controller component
indicator light. If there is power to
the motor, check motor windings
Code 2: Auger motor draws too
many amps, controller shut unit off.
Check for damage to gear reducer
or auger bearings.
Check for restriction between
reservoir and evaporator
Bin Eyes Blocked light is On
Ice is in the chute.
No ice in the chute. Check position
of sensors, check sensors for scale
build up
Code 4: Refrigeration system over
or under pressure
Check for proper operation of the
fan and motor; check for proper flow
of water into evaporator; check for
proper refrigerant charge
Code 4: Chute thermostat opened
Unit overfilled chute, check photo
eye system
Everything is in operation, but no
refrigeration effect
Check compressor
Check TXV superheat
Check refrigerant charge
Optional bin thermostat is open
Check thermostat or jumper wire on
blue wires to #5 & #6
Optional ultrasonic system senses
false bin full
Check sensor for proper installation
and operation
Low ice making capacity
Scale build up
Remove scale from evaporator and
water system
Air filter dirty Clean air filter
Condenser fins dirty Clean condenser
Expansion valve superheat incorrect Check superheat
Vue de la page 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

Commentaires sur ces manuels

Pas de commentaire